Home DC Power Rigol DP711
Rigol DP711 - Image 1
Rigol DP711 - Image 2
Rigol DP711 - Image 3
DC Power

Rigol DP711

Precision You Can Trust
NABL-Accredited Calibration | Available on Request
Rs. 44604.00

The Rigol DP711 is a high-quality programmable DC power supply with one output channel, offering a maximum voltage of +30 V, a maximum current of 5 A, and a total power output of 150 W. It features an intuitive interface, large TFT display, and advanced functions like programmable voltage curves, timing output, and overvoltage/overcurrent protection. The device is backed by a 3-year warranty..

Quantity:
- +
Product added to cart successfully
  • Detail
  • Special Features
  • Specification

🌬️ Thermals & Range
Fan cooling → steady airflow → reliable runs from 0 °C to 40 °C.
Cooler supply → quieter data → longer component life.

⏱️ Timing Output (Set → Run)
Pick voltage, current, duration → timer drives the sequence → complex load profiles run hands-free.
Stored steps → repeat tomorrow → consistent results.

🔒 Protection (Limits → Safety)
Set OVP/OCP thresholds → hit a limit → output shuts off and prompts next steps → DUT stays safe.

🖥️ Display & Control (See → Act)
3.5″ screen → large numbers, clean layout → fewer mis-sets under pressure.
Front-panel knobs/keys → quick edits → instant confirmation.

🌐 Remote Operation (Plug → Perform)
RS-232 control → send SCPI commands → automate tests, log data, standardize runs.

🧪 Where It Fits (Use → Payoff)
Board bring-up → soft ramps + limits → fewer fried parts.
Regulator checks → timed steps → honest transient behavior.
Teaching labs → simple UI → faster learning, safer benches.

🖥️ Clear, Intuitive Interface
Status stays visible → real-time help sits at the bottom → tap, adjust, confirm without guesswork.

🔒 Overvoltage & Overcurrent Protection
Set OVP/OCP thresholds → output exceeds limit → supply shuts down and prompts next steps → DUT stays safe.

⏱️ Powerful Timing Output
Pick voltage, current, duration → timer drives the sequence → load sees varied outputs exactly as planned.

🔗 Convenient Trigger Function
Use external trigger → supplies in series/parallel fire in sync → starts line up, results stay consistent.

💾 Easy File Storage
Save state and timer files → recall with one step → restore defaults or past setups fast.

Specification Rigol DP711
Outputs 1
Output Power (max.) 150 W
Overtemperature shutdown 55 °C
Working Temperature 0 °C to 40 °C
Cooling Method Fan cooling
Output Voltage (max.) 0 to +30 V/DC
Accuracy (Voltage) ±0.05% + 20 mV
Resolution (Voltage) 10 mV (1 mV with high res. option)
Overvoltage Protection 0.01 V to 33 V
Load Regulation (Voltage) <0.01% + 2 mV
Line Regulation (Voltage) <0.01% + 2 mV
Ripple and Noise (Voltage) <500 µVrms / 3 mVpp
Output Current (max.) 5 A/DC
Accuracy (Current) ±0.2% + 10 mA
Resolution (Current) 10 mA (1 mA with high res. option)
Overcurrent Protection 0.01 A to 5.5 A
Load Regulation (Current) <0.01% + 2 mA
Line Regulation (Current) <0.01% + 2 mA
Ripple and Noise (Current) <2 mArms
Display 8.9 cm (3.5″) TFT-LCD
Resolution (Display) 320 × 240 Pixel
Additional Interfaces RS-232
Dimensions (W × H × D) 14 cm × 20.2 cm × 33.2 cm
Weight 6.9 kg
Input 230 V/AC, 220 V/AC, 120 V/AC, or 110 V/AC (adjustable)